Carbon Fibre Steering Wheel Retrofit With Orange Stitching UK Made
UK Made Carbon Fibre Steering Wheel and Airbag Cover Upgrade
This one came out unbelievably good—today’s carbon fibre steering wheel retrofit swapped in a hand made in UK carbon fibre steering wheel with orange stitching, perforated sides, and a custom airbag cover setup for a seriously clean, factory-plus look.
The best part? We also moved a beautiful new airbag cover into an older airbag, then finished it off with a solid carbon fibre overlay cover that sits on top of the existing airbag cover. Ever looked at your interior and thought, “Everything’s fine… except that steering wheel”?
What the customer wanted
The goal was straightforward: a proper interior upgrade with a tidy finish, not something that looks “stuck on” five minutes later. So we delivered a UK-made carbon fibre wheel with orange stitching, plus perforated side grips for that nicer-in-the-hands feel.
At the same time, we refreshed the airbag appearance by transferring a new airbag cover into an older airbag assembly. Because airbag trims are right in your face every drive, getting the details right matters.
Parts and prep used
- Steering wheel: hand made in UK carbon fibre steering wheel
- Finish details: orange stitching and perforated sides
- Airbag trim approach: new airbag cover moved into an older airbag
- Overlay piece: solid carbon fibre airbag cover overlay (fits over the existing airbag cover)
- Adhesion prep: adhesive primer applied to the steering wheel before bonding
Because the carbon fibre airbag cover is a solid overlay piece, the prep work is where the job is won or lost. That’s why we used adhesive primer on the steering wheel surface so the overlay sticks properly and stays put.
Fitment and sign-off
- Removed the existing steering wheel and airbag components carefully so trims and connectors stayed undamaged.
- Fitted the new UK-made carbon fibre steering wheel and checked the feel and seating.
- Transferred the new airbag cover into the older airbag as planned.
- Prepped the steering wheel with adhesive primer, then installed the carbon fibre airbag cover overlay onto the existing cover.
- Reassembled everything with a focus on alignment and a clean, even finish.
What we verified: the wheel and airbag cover sat straight, the overlay bonded securely after primer prep, and the finished cabin view looked consistent from the driver’s seat.
Even without getting into heavy electronics, this kind of work still follows the same mindset we apply to vag retrofits: do it cleanly, make it integrate properly, and avoid shortcuts that show later. That same approach is why people come to us for vag retrofits that look right and feel right.
Quick FAQ
Q: Will this carbon fibre steering wheel retrofit fit my vehicle?
A: Fitment depends on your current steering wheel and airbag setup. Send a clear photo of your wheel and airbag area and we’ll advise on what matches.
Q: Why use adhesive primer on the wheel?
A: The carbon fibre airbag cover is a solid overlay piece, so surface prep matters. Primer helps the adhesive bond properly for a long-lasting fit.
Q: Does moving a new airbag cover into an old airbag affect safety?
A: We only described the cosmetic cover transfer and overlay fitment here. If you message us with your exact setup, we’ll talk through what’s involved for your vehicle.
Q: Will this trigger warning lights or need coding?
A: This project focused on the physical steering wheel fitment and airbag cover cosmetics. If your vehicle has extra steering wheel functions, we’ll confirm what’s required before booking.
Q: What should I send when asking for a quote?
A: A photo of your current steering wheel/airbag, plus the finish you want (stitching color and perforated grips), is perfect.
Coverage and booking
If you want the same kind of clean finish, message us about a carbon fibre steering wheel retrofit and include a quick photo of your current wheel. For steering wheel and airbag cover upgrade work, we regularly see customers travel in for bookings from Redditch, London, Manchester, Leeds, Birmingham, and Coventry.
Although this job was all about the hands-on interior upgrade, it’s worth saying we’re set up for proper retrofit work end-to-end—so if you’re browsing ideas, have a look through more projects and see what kind of finishes you like.
📍 Professional Retrofits Limited
🏠 Unit 9, Station Rd, Higham on the Hill, Nuneaton, CV13 6AG
Follow us on Social Media:
🔵 Facebook
📸 Instagram
▶️ YouTube
Relevant Links: